Chauvet Work Light 15090394 User Manual

User Manual  
 
1. BEFORE YOU BEGIN  
MotionFaçade™ LED  
Replacement LEDs  
2m Velcro  
What Is  
Included  
MotionFaçade™ Controller  
Power Cord  
Reusable Zip Ties (Tie Wraps)  
Warranty Card  
Signal Cable  
Carrying Bag  
Quick Reference Guide  
Unpacking Immediately upon receipt, carefully unpack this product and check the container to make  
sure you have received all the parts indicated above in good condition.  
Instructions  
If the box or contents (this product and any other accessory included) appears damaged  
Claims  
from shipping, or shows signs of mishandling, notify the carrier immediately, not  
CHAUVET®, upon receipt of the damaged merchandise. Failure to do so in a timely  
manner may invalidate your claim with the carrier. In addition, retain the container and  
all the packing material for inspection.  
For other issues such as missing components or parts, damage not related to shipping,  
or concealed damage, file a claim with CHAUVET® within 7 days of receiving the  
merchandise.  
Convention  
1~512  
Meaning  
Text  
Conventions  
A range of values  
50/60  
A set of values of which only one can be chosen  
A menu option not to be modified  
Settings  
Menu > Settings A sequence of menu options to be followed  
<ENTER>  
ON  
A key to be pressed on the product’s control panel  
A value to be entered or selected  
Icon  
Meaning  
Icons  
Critical installation, configuration, or operation information. Failure  
to comply with this information may cause the product not to work,  
damage it, or cause harm to the operator.  
Important installation or configuration information. Failure to  
comply with this information may keep the product from working  
correctly.  
Useful information.  
The information and specifications contained in this document are subject to change  
without notice. CHAUVET® assumes no responsibility or liability for any errors or  
omissions that may appear in this manual. CHAUVET® reserves the right to update the  
existing document or to create a new document to correct any errors or omissions.  
Document  
Information  
You can download the latest version of this document from www.chauvetlighting.com.  
© Copyright 2012 CHAUVET®. All rights reserved.  
Electronically published by CHAUVET® in the United States of America.  
Author  
Date  
Editor  
Date  
A. Diaz  
5/18/12  
S. Diaz  
8/6/12  
MotionFaçade™ LED User Manual (Rev. 10)  
 
Page 3 of 12  
Use on Dimmer  
Outdoor Use  
Sound Activated  
DMX  
Auto Programs  
Product at a  
Glance  
Auto-ranging Power Supply  
Replaceable Fuse  
User Serviceable  
Duty Cycle  
Master/Slave  
Please read the following Safety Notes carefully before working with this product. They  
include important safety information about its installation, usage, and maintenance.  
Safety Notes  
Always connect this product to a grounded circuit to avoid the risk of electrocution.  
Always disconnect this product from the power source before cleaning it or replacing  
the fuse.  
Avoid direct eye exposure to the light source while the product is on.  
Make sure the power cord is not crimped or damaged.  
Never disconnect this product from power cord by pulling or tugging on the cord.  
Make sure there are no flammable materials close to the unit while operating.  
Do not touch this product’s housing when operating because it may be very hot.  
Always make sure that the voltage of the outlet to which you are connecting this  
product is within the range stated on the decal or rear panel of the product.  
This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not  
expose this product to rain or moisture.  
Always install this product in a location with adequate ventilation, at least 20 in (50  
cm) from adjacent surfaces.  
Be sure that no ventilation slots on the unit’s housing are blocked.  
Never connect this product to a dimmer.  
Make sure to replace the fuse with another of the same type and rating.  
Never carry this product from the power cord or any moving part.  
The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this  
product at higher temperatures.  
In the event of a serious operating problem, stop using the unit immediately.  
Never try to repair this product. Repairs carried out by unskilled people can lead to  
damage or malfunction. Please contact the nearest authorized technical assistance  
center.  
This product is NFPA-certified fire retardant material.  
Keep this User Manual for future consultation. If you sell this product to another user,  
be sure that they also receive this document.  
Page 4 of 12  
MotionFaçade™ LED User Manual (Rev. 10)  
 
2. INTRODUCTION  
Product Overview  
Front Panel  
Button Menu  
LED Display  
Power In  
Top Panel  
Curtain Input  
Fuse holder  
On/Off Switch  
DMX Out  
DMX In  
Product Dimensions  
MotionFaçade™ LED User Manual (Rev. 10)  
Page 5 of 12  
 
3. SETUP  
This product has an auto-ranging power supply and it can work with an input voltage  
range of 100~240 VAC, 50/60 Hz.  
AC Power  
To determine the power requirements for this product (circuit breaker, power outlet, and  
wiring), use the current value listed on the label affixed to the product’s back panel, or  
refer to the product’s specifications chart. The listed current rating indicates the  
product’s average current draw under normal conditions.  
Always connect this product to a protected circuit (circuit breaker or fuse),  
making sure that it has an appropriate electrical ground to avoid the risk of  
electrocution or fire.  
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even  
if the rheostat or dimmer channel serves only as a 0 to 100% switch.  
Fuse  
Replacement  
Follow the instructions below to change the fuse in the control box, if necessary.  
Disconnect this product from the power outlet before replacing the fuse.  
1. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder and pry out of  
its housing.  
2. Remove the blown fuse from its holder and replace with a fuse of the exact same  
type and rating.  
3. Insert the fuse holder back into place, and reconnect power.  
Installed fuse  
(held by plastic clip)  
Safety cap  
Spare fuse holder  
(inside safety cap)  
This product ships with no spare fuse. The safety cap does have room for a spare.  
Always replace a blown fuse of the same type and rating.  
Page 6 of 12  
MotionFaçade™ LED User Manual (Rev. 10)  
 
Before mounting this product, read and follow the safety recommendations indicated in  
the Safety Notes section (page 2 of this manual).  
Mounting  
Orientation  
Rigging  
The MotionFaçade™ LED may be mounted in any position; however, make sure  
adequate ventilation is provided around the product.  
Before deciding on a location for this product, always make sure that it will be easy to  
access the unit for maintenance and programming purposes.  
Make sure that the structure onto which you are mounting this product can support its  
weight. Please see the Technical Specifications section of this manual for weight  
information.  
Mount the product securely to a rigging point, whether an elevated platform or a truss.  
Reusable zip ties (tie wraps) are provided with the MotionFaçade™ LED for quick and  
easy mounting.  
Text here  
Grommets for easy truss  
mounting and various  
stand applications  
Mounting Diagram  
MotionFaçade™ LED User Manual (Rev. 10)  
 
Page 7 of 12  
4. OPERATION  
Control Panel  
Operation  
To access the control panel functions, use the four buttons located underneath the  
display. Please refer to the Product Overview (page 5) to see the buttons location on the  
control panel.  
Button  
Function  
Press to find an operation mode or to back out of the current menu  
option  
<MENU>  
<ENTER>  
<UP>  
Press to activate a menu option or a selected value  
Press to scroll up the list of options or to find a higher value  
Press to scroll down the list of options or to find a lower value  
<DOWN>  
Mode  
Programming Steps  
Description  
Menu Map  
Version  
Software Version  
Shows the software version number  
Disables unit’s auto mode function  
Enables unit’s auto mode function  
Disables unit’s sound mode function  
Enables unit’s sound mode function  
Disables unit’s DMX512 mode function  
NO  
YES  
NO  
Automatic  
Sound  
YES  
NO  
DMX Mode  
Speed  
Enables unit’s DMX512 mode and sets  
starting address  
YES  
1~512  
Selects how fast the auto mode program  
runs  
1~9  
Disables numbered program running in  
sequence in auto or sound mode  
NO  
Program  
1~30  
Enables numbered program running in  
sequence in auto or sound mode  
YES  
Set this product in DMX mode to control with a DMX controller.  
1. Connect the product to a suitable power outlet.  
2. Turn the product on.  
Configuration  
(DMX)  
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input  
socket of the product.  
When selecting a starting DMX address, always consider the number of DMX channels  
the selected DMX mode uses. If you choose a starting address that is too high, you  
could restrict the access to some of the product’s channels.  
Starting Address  
The MotionFaçade™ LED uses up to 8 DMX channels in its 8-channel DMX mode,  
which defines the highest configurable address to 505.  
If you are not familiar with the DMX protocol, download the DMX Primer from  
To select the starting address, do the following:  
1. Press <MENU> repeatedly until Dmx512 shows on the display.  
2. Press <ENTER>.  
3. Press <UP> to select Yes in the menu.  
4. Press <ENTER>. Address should appear on the screen.  
5. Use <UP> or <DOWN> to select the starting address.  
6. Press <ENTER>.  
Page 8 of 12  
MotionFaçade™ LED User Manual (Rev. 10)  
 
Set the product in one of the standalone modes to control without a DMX controller.  
1. Connect the product to a suitable power outlet.  
2. Turn the product on.  
Configuration  
(Standalone)  
Never connect a product that is operating in any standalone mode, whether Static,  
Automatic, or Sound to a DMX string connected to a DMX controller. This is  
because products in standalone mode may transmit DMX signals that could  
interfere with the DMX signals from the controller.  
To enable the Sound-Active mode, do the following:  
1. Press <MENU> repeatedly until Sound shows on the display.  
2. Press <ENTER>.  
Sound-Active  
Mode  
3. Use <UP> or <DOWN> to select Yes.  
4. Press <ENTER>.  
5. Turn the music on until the product responds to the beat of the music.  
The product will only respond to low frequencies of the music (bass and drums).  
To enable the Automatic Mode, follow the instructions below:  
1. Press <MENU> repeatedly until Automatic shows on the display.  
2. Press <ENTER>.  
Automatic Mode  
3. Use <UP> or <DOWN> to select Yes.  
4. Press <ENTER>.  
This mode allows a single unit (the “master”) to control the actions of one or more units  
(the “slaves”) without the need of a DMX controller. The master unit will be set to  
operate in either Automatic or Sound-Active mode, while the slave units will be set to  
operate in Slave Mode. Once set and connected, the slave units will operate in unison  
with the master unit.  
Master/Slave  
Mode  
Configure the units as indicated below.  
Slave units:  
1. Press <MENU> repeatedly until 8-CH shows on the display.  
2. Press <ENTER> to accept.  
3. Use <UP> or <DOWN> to select the starting address to: d001.  
4. Press <ENTER>.  
5. Connect the DMX input of the first slave unit to the DMX output of the master unit.  
6. Connect the DMX input of the subsequent slave units to the DMX output of the  
previous slave unit.  
7. Finish setting and connecting all the slave units.  
Master unit:  
1. Set the master unit to operate in either Automatic or Sound-Active mode.  
2. Make the master unit the first unit in the DMX daisy chain.  
Wait until all the slave units are configured and connected before connecting the  
master unit to the DMX daisy chain.  
Never connect a DMX controller to a DMX string configured for Master/Slave  
operation because it may interfere with the signals from the master unit.  
Do not connect more than 31 slave units to the master unit.  
The MotionDrape™ and MotionFaçade™ can also be used together in this mode  
with the same configuration.  
MotionFaçade™ LED User Manual (Rev. 10)  
 
Page 9 of 12  
DMX Channel Assignments and Values  
Channel  
1
Function  
Value  
Setting  
8-CH  
000 007 No function  
008 255 0~100%  
Dimmer  
Strobe  
000 010 No function  
011 255 0~100%  
2
3
4
5
Red  
000 255 0~100%  
Green  
Blue  
000 255 0~100%  
000 255 0~100%  
000 015 No function  
016 031 Falling Star  
032 047 Diagonal Color Bands  
048 063 Color Pattern Chase  
064 079 Inward Arrow (L-R)  
080 095 Color Stack  
096 111 Multi-Color Freeway  
112 127 Color Wave (L-R)  
128 143 Color Wave (R-L)  
144 159 Color Bar Chase (L-R)  
160 175 Color Bar Chase (R-L)  
176 191 Windmill  
6
Programs 1-15  
192 207 Fan  
208 223 Whirlpool  
224 239 Falling Snow  
240 255 Multi Box Frenzy  
000 015 No function  
016 031 Center Burst  
032 047 Outer Burst  
048 063 EQ Effect  
064 079 Rolling Color  
080 095 Horizontal Stacking  
096 111 Inner Zone  
112 127 Outer Zone  
128 143 Diamond Spread  
144 159 Single Diamond Squeeze  
160 175 Follow The Leader  
176 191 Crisscross  
7
Programs 16-30  
192 207 X-Factor  
208 223 Double Diamond Squeeze  
224 239 Red X Factor  
240 255 Multicolor Rain  
000 255 0~100%  
8
Speed  
Page 10 of 12  
MotionFaçade™ LED User Manual (Rev. 10)  
 
5. TECHNICAL INFORMATION  
Technical Specifications  
Length (Drape)  
Width (Drape)  
Height (Drape)  
Weight (Drape)  
Dimensions and  
Weight  
6.6 ft (78.7 in)  
2 m (2,000 m)  
4 ft (48 in)  
1.2 m (1,220 mm)  
0.6 in (15 mm)  
3.9 lbs (1.7 kg)  
Length (Control Box) Width (Control Box) Height (Control Box)  
9.6 in (243 mm) 5.3 in (135 mm) 2 in (50 mm)  
Weight (Control Box)  
1.8 lbs (0.8 kg)  
Note: Dimensions in inches rounded to the nearest decimal digit.  
Power Supply Type  
Range  
Voltage Selection  
Power  
Switching (internal)  
100~240 V, 50/60 Hz  
Auto-ranging  
Parameter  
Consumption  
Operating  
Fuse  
120 V, 60 Hz  
21 W  
230 V, 50 Hz  
23 W  
0.2 A  
0.1 A  
F 2 A, 250 V  
F 2 A, 250 V  
Power I/O  
US/Worldwide  
IEC  
UK/Europe  
IEC  
Power input connector  
Power output connector  
Power Cord plug  
Edison  
IEC  
Edison (US)  
Local plug  
Type  
Quantity  
Lifespan  
Light Source  
Thermal  
DMX  
LED  
66  
50,000 hours  
Maximum External Temp.  
Cooling System  
104° F (40° C)  
Convection  
I/O Connectors  
Connector Type  
Channel Range  
3-pin XLR  
Sockets  
8
Product Name  
Item Code  
Item Number  
Ordering  
MotionFaçade™ LED  
15090394  
MOTIONFACADELED  
MotionFaçade™ LED User Manual (Rev. 10)  
 
Page 11 of 12  
In case you need to return a product or request support, follow the procedure below:  
If you live in the U.S., contact CHAUVET® World Headquarters.  
If you live in the UK or Ireland, contact CHAUVET® Europe Ltd.  
If you live in any other country, DO NOT contact CHAUVET®. Instead, contact your  
distributor of record. Refer to our website for contact details of distributors outside  
the U.S., United Kingdom, or Ireland.  
World Headquarters  
CHAUVET®  
United Kingdom & Ireland  
CHAUVET® Europe Ltd.  
Contact Us  
General Information  
General Information  
Address:  
5200 NW 108th Avenue  
Sunrise, FL 33351  
(954) 929-1115  
Address:  
Unit 1C  
Brookhill Road Industrial Estate  
Pinxton, Nottingham, UK  
NG16 6NT  
Voice:  
Fax:  
(954) 929-5560  
Toll free:  
(800) 762-1084  
Voice:  
Fax:  
+44 (0)1773 511115  
+44 (0)1773 511110  
Technical Support  
Technical Support  
Voice:  
Fax:  
(954) 929-1115 (Press 4)  
(954) 756-8015  
Email:  
Email:  
World Wide Web  
World Wide Web  
If you live outside the U.S., United Kingdom, or Ireland, contact your distributor of  
record and follow their instructions on how to return CHAUVET® products to  
them. Visit our website for contact details.  
Call the corresponding CHAUVET® Tech Support office and request a Return  
Merchandise Authorization (RMA) number before shipping the product. Be prepared to  
provide the model number, serial number, and a brief description of the cause for the  
return.  
Returns  
You must send the merchandise prepaid, in its original box, and with its original packing  
and accessories. CHAUVET® will not issue call tags.  
Clearly label the package with the RMA number. CHAUVET® will refuse any product  
returned without an RMA number.  
DO NOT write the RMA number directly on the box. Instead, write it on a properly  
affixed label.  
Before sending the product, clearly write the following information on a piece of paper  
and place it inside the box:  
Your name  
Your address  
Your phone number  
The RMA number  
A brief description of the problem  
Be sure to pack the product properly. Any shipping damage resulting from inadequate  
packaging will be your responsibility. Proper FedEx packing or double-boxing are  
recommended.  
CHAUVET® reserves the right to use its own discretion to repair or replace  
returned product(s).  
Page 12 of 12  
MotionFaçade™ LED User Manual (Rev. 10)  
 

Black Box Switch LE2690A User Manual
Black Decker Vacuum Cleaner 724196 User Manual
Bravetti Cooktop KC281HB User Manual
Breezaire Fan WKC Series User Manual
Broan Ventilation Hood QS236BL User Manual
Broan Ventilation Hood RME50000 User Manual
Broilmaster Gas Grill BBA 1 User Manual
Carrier Air Conditioner 50ZH024 060 User Manual
Carrier Heat Pump 25HBB User Manual
Casio Calculator fx 500MS User Manual